 |
|
| A clothes-drying
rack that has many good features can be made as shown in the illustration. When the rack is closed it will fit into a very small space and one or more wings can be used at a time as the occasion or space permits, and not tip over. The rack can be made of any hard wood and the material list is as follows: 1 Center post. 1-1/4 in. square by 62 in. 4 Braces. 1-1/4 in. square by 12 in. 16 Horizontal bars. 1 by 1-1/4 by 24 in. 4 Vertical pieces. 1/4 by 1 by 65 in. Attach the four braces for the feet with finishing nails after applying a good coat of glue. The horizontal bars are fastened to the vertical pieces with rivets using washers on both sides. The holes are bored a little large so as to make a slightly loose joint. The other ends of the bars are fastened to the center post with round head screws. They are fastened, as shown in the cross-section sketch, so it can be folded up. --Contributed by Herman Fosel, Janesville, Wis. Listing # 032 |
 |
Reynolds Trading, 21-22 Main Street, Ballyshannon, Co. Donegal, Ireland. |